How do you feel about tackling a fencing project? Installing timber fence panels might seem tricky, but with the right know-how (and the right supplies), it’s easier than you think. Whether you’re fencing off a backyard or adding stylish boundaries, doing it properly makes all the difference.
At Dunham Fencing Supplies, one of the Northwest’s trusted fencing manufacturers, we’ve got the tips — and the tools — you need to install like a true pro.
Pick the Right Gear
Before you even lift a spade, it’s essential to pick quality materials. Solid timber posts are the backbone of a strong fence, while durable panels keep everything looking smart and standing tall for years.
Don’t forget about the extras either — timber gate rails add strength to access points, and timber post extensions are brilliant for adjusting heights or fixing older fencing.
Choosing high-quality products from reputable fencing manufacturers like Dunham Fencing Supplies means setting yourself up for success right from the start.
Cutting corners with cheap fencing supplies can lead to sagging panels, rotting posts, and a lot of extra work down the line. Trust us — a sturdy fence begins with smart shopping!
Prep Like a Pro
A little prep work saves a lot of headaches later. First, measure your boundary carefully, marking post positions with string and stakes.
Standard panels are usually six feet wide, so plan your spaces accordingly. Double-check those lines — wobbly fences start with bad measuring! Once you’re happy, it’s time to dig post holes. They should be at least 600mm deep for standard fencing, and deeper if your soil is sandy or loose.
Remember to factor in a good gravel level at the base of each hole for drainage.
At Dunham Fencing Supplies, we always recommend checking your levels and alignment at every stage. A little patience here leads to a fence that’s strong, straight, and seriously satisfying.
Putting it Together
Now for the fun bit! Set your timber posts first, securing them with concrete or post mix. Use a spirit level to make sure each one is perfectly vertical.
Attach your first panel to the posts using galvanised clips or screws — timber needs room to breathe, so don’t fix it too tight. Work along the line, checking spacing and level regularly. If you’re fitting timber post extensions, double-check they’re securely fastened before moving on.
Need to fit timber gate rails? Slot them in as you go, ensuring they’re strong enough to handle daily use. At Dunham Fencing Supplies, we believe good installation is all about steady progress — measure twice, drill once, and step back often to admire your handiwork!
Seal the Deal
The final step? Protecting your masterpiece!
After Installing timber fence panels, we recommend treating all timber panels and posts with a quality wood preservative, especially at cut edges. This protects against moisture, rot, and sun damage.
A light stain or paint adds style and an extra layer of defence. Re-apply treatments every couple of years to keep everything in top shape.
Using a premium fencing supplier in Manchester means less maintenance long-term, and fewer surprises after a rainy winter! A little care goes a long way toward making your new fence look fresh, sturdy, and beautiful for many years to come.
Ready to build a fence that’s built to last? Dunham Fencing Supplies has everything you need — from timber posts and panels to gate rails, post extensions, and all the extras. Visit us today or give us a call — and let’s get your project off to a flying start!